Laserfiche WebLink
QUESTIONS POSSIBLE SOLUTIONS <br /> Priority Yes No <br /> 2 Access to Goods and Services <br /> Ideally,the layout of the building should allow <br /> people with disabilities to obtain materials or <br /> services without assistance. <br /> Horizontal Circulation (ADAAG 4.3) <br /> Does the accessible entrance provide direct ❑ ❑ 0 Add ramps or lifts. <br /> access to the main floor,lobby, or elevator? 0 Make another entrance accessible. <br /> Are all public spaces on an accessible route ❑ ❑ 0 Provide access to all public spaces <br /> of travel? along an accessible route of travel. <br /> e Is the accessible route to all public spaces ❑ ❑ 0 Move furnishings such as tables, <br /> at least 36 inches wide? II chairs,display racks, vending <br /> width <br /> machines,and counters to make <br /> more room. <br /> e Is there a 5-foot circle or a T-shaped space for a ❑ ❑ 0 Rearrange furnishings, displays, <br /> person using a wheelchair to reverse direction? I I and equipment. <br /> width <br /> Doors (ADAAG 4.13) <br /> e Do doors into public spaces have at least a ❑ ❑ 0 Install offset(swing-clear)hinges. <br /> 32-inch clear opening? 0 Widen doors. <br /> clear opening <br /> eOn the pull side of doors,next to the handle,is ❑ ❑ 0 Reverse the door swing if it is <br /> there at least 18 inches of clear wall space so safe to do so. <br /> that a person using a wheelchair or crutches 0 Move or remove obstructing <br /> can get near to open the door? clear space partitions. <br /> e Can doors be opened without too much force ❑ ❑ 0 Adjust or replace closers. <br /> (5 lbf maximum for interior doors)? ^ 0 Install lighter doors. <br /> L� <br /> 0 Install power-assisted or <br /> force automatic door openers. <br /> e Are door handles 48 inches high or less and ❑ El 0 Lower handles. <br /> operable with a closed fist? 0 Replace inaccessible knobs or <br /> latches with lever or loop handles. <br /> h` h 0 Retrofit with add-on levers. <br /> 0 Install power-assisted or <br /> automatic door openers. <br /> e Are all threshold edges 1/4-inch high or less, El ❑ 0 If there is a threshold greater <br /> or if beveled edge,no more than 3/4-inch than 3/4-inch high,remove it or <br /> high? modify it to be a ramp. <br /> }leight <br /> 0 If between 1/4-aand 3/4-inch <br /> high, add bevels to both sides. <br /> Checklist for Existing Facilities version 2.1 ©revised August 1995,Adaptive Environments Center,Inc.for the National Institute on <br /> Disability and Rehabilitation Research.For technical assistance,call 1-800-949-4ADA(voice/TDD). <br /> Attachment 2-5 <br />