Laserfiche WebLink
Ground Clearance-8 inches minimum <br />Bucket: Standard bucket with bolt on blade <br />Performance: Travel speed-- 0-5.5 mph minimum, 1 S! gear 12 mph minimum 2"d gear <br />Operating Capacity--2,600 lbs. minimum <br />Tipping Load-----7,600 lbs. minimum <br />Bucket Breakout Force---6,500 lbs. minimum <br />Height to Bucket Hinge Pin--130 inches <br />Reach at Maximum Height--34 inches minimum <br />Cutting Edge Clearance Height--98 inches <br />Hydraulics: 18 gallon minimum reservoir <br />Gear Type --capable for optional high flow, dual pump system to 32 gpm <br />minimum. Valves --Three spool, open center series standard, lift with float <br />detent, bucket tilt and auxiliary function. Hydraulic bucket, self -leveling <br />to be provided. Cylinders --double acting <br />Track Drive: 2 idlers/4 rollers per side minimum permanently sealed roller bearings. <br />Minimum 17" wide. Grease cylinder shall be used for adjustment. <br />Cab & Safety <br />Equipment: Operator cab to meet SAE Specifications for rollover and falling object <br />protection. Operator cab and side screen provided. Cab must be capable <br />of rotating back for maintenance, seat belt must be furnished, parking <br />brake, strobe light, and work lights to be provided. Grab handles must be <br />provided to assist operator mounting and dismounting loader. Cab to <br />include windshield wiper and driving lights front and rear. Cab shall be <br />heated and air conditioned. <br />Paint: Paint will be durable and anti -corrosive <br />Bid Alternates: The following attachments must be bid separate for bid to be valid. <br />Standard bucket with bolt on blade <br />2. 48" pallet forks <br />3. 24" cold planer <br />4. 72" broom with water <br />5. Trailer - The following are minimum specifications for a trailer to <br />haul the above Skid Steer Loader. Kauffman tilt bed 22' or equal 17,000 <br />lbs. minimum capacity, hydraulic brakes, metal deck, plate fenders, 48" <br />ramps, adjustable tow eye, all lights and safety equipment to meet DOT <br />standards. <br />Attachments: All attachments must be mounted on a quick change mechanism with pin <br />attachment. No attachment will be considered that cannot be removed or <br />mounted by an experienced operator in approximately two (2) minutes. <br />Units must be capable of attaching to and operating the 24" cold planers <br />and skid steer buckets that are now owned and used by the Street <br />6 <br />