Laserfiche WebLink
2019 International MV/PL Custom Titan 170 <br />Type I Ambulance Proposal Specification <br />WHELEN RUB RAIL LIGHTS: <br />Six (6) Whelen LED warning lights shall be installed within the C-Channel Rub Rails. The lights shall flash in conjunction <br />with the body flashing lights. There shall be three lights installed on each side of the vehicle. Whelen lights PSROOFRR, <br />Red with a red Lens and PSCOOFCR Clear. <br />The curbside center white Whelen stripe light shall Steady Burn w/Opening Side Entry Door <br />EXTERIOR VEHICLE LIGHTS AND EQUIPMENT <br />LIGHTHEAD LENSES: <br />The DOT light head tenses shall be color coordinated with each lights function. <br />WHELEN LED VEHICLE TAIL LIGHTS: <br />The vehicle shall be equipped with two (2) Whelen 600 Series LED red stop/tail lights. The lights shall be located on the <br />lower outboard corners of each side of the rear of the vehicle. The body shall be designed in such a way to eliminate the <br />lights from being exposed to the elements from the backside. <br />VEHICLE BACK-UP LIGHTS, MAX. INT.: <br />The vehicle shall be equipped with two Whelen 600 Series Maximum Intensity rear backup lights, one each side on the <br />'-board side of the lower panel, The lights shall operate any time the vehicle is placed in reverse, The light shall include <br />,egrated metalized chrome housing. The body shall be designed in such a way to eliminate the lights from being <br />exposed to the elements from the backside. <br />WHELEN LED POPULATED AMBER DIRECTIONAL <br />LIGHTS: <br />A pair of Whelen 600 Series LED amber arrow directional signal lights shall be installed on the rear of the vehicle directly <br />above the stop/tail and back-up lights. The lights shall include integrated metalized chrome flange housing on each <br />fixture. <br />EXTERIOR LIGHTS VERTICAL STACK: <br />The rear stop/tail, turn, and back up light heads shall be stacked vertically I/L/O the standard side by side layout. <br />MARKERICLEARANCE LIGHTS: <br />Heavy Duty Lighting, LED, Mini Oval w/ Chrome Bezel, Marker and Clearance lights shall be installed on the front rear <br />and both sides of the body to meet all Federal lighting requirements FMVSS 108. <br />LOWER FLASHING MARKER LIGHTS: <br />Two (2) Lower marker clearance lights shall be installed on each side at the belt iine area of the vehicle, one front, and <br />one rear. The lights shall be wired to the side directional lights and activate any time the vehicles directional switch is <br />activated. The marker clearance light shall also include an integrated reflex reflector into the lens. <br />A4539-0001 <br />08124/18 <br />40 <br />