No. 2857 adopting architectural and site design guidelines for Ignition Park

Home Browse Search

A A Ignition Park Architectural and Site Design Guidelines 5. Mechanical Equipment In order to minimize the negative visual impact associated with the location of mechanical equipment (e.g., HVAC systems and related components; pedestals for electrical, telephone or cable service; above - ground water and gas utility meters; and the like) in required yards, on buildings or adjacent to buildings, mechanical equipment shall be screened subject to approval by the ARB, and in substantial compliance with the following: (a) Roof Mounted — All roof mounted mechanical equipment shall be screened based upon an elevation view of the building on all sides. (b) Ground Mounted — All ground mounted mechanical equipment shall be screened on all sides by: the building; screen walls or fences of a material and color which is compatible with the primary building; or, evergreen or densely twigged hedge plants (with or without mounding) of a height at time of planting which is not less than the height of the mechanical equipment to be screened. 6. Trash Receptacles / Trash Enclosures The location, size and screening of all trash receptacles within Ignition Park shall be subject to approval by the ARB, and shall be in substantial compliance with the following: Trash receptacles, less than six (6) cubic feet in volume, may be located near building entrances or along pedestrian ways within Ignition Park. Such trash receptacles shall be of a consistent design and style throughout Ignition Park. All trash receptacles in excess of six (6) cubic feet shall be located within a building or in a solid walled enclosure. The materials of the three (3) solid - walled sides of the enclosure shall be consistent and compatible with the materials of the primary building. The solid - walled side of a trash enclosure shall be provided with foundation landscaping of not less than hedge plants spaced four (4) feet on- center. Gates shall be located on the non - solid - walled side of the trash enclosure and shall be covered with a wood, simulated wood, decorative metal or a similar material painted a compatible color with the primary building. 7. Trash Compactors BDDBOI 6344433v2 The location and screening of all trash compactors not located within a building shall be subject to approval by the ARB, and shall be in substantial compliance with the following: