Laserfiche WebLink
3. Installation: <br />1. Remove Parts F1 — F3 from the Auger stake (B) and set aside. <br />2. Place the Adaptor (A) on to the Auger stake (B) <br />3. Place the Turning bar (D) in the hole through the Adaptor and the <br />Auger stake, Fig. 1 <br />4. Place Adaptor mounting system in desired location and apply <br />downward pressure while turning the Turning bar clock wise. <br />5. Occasionally check the Level Tool on the Adaptor to ensure your auger <br />stake is straight, see part A. <br />6. Stop turning once the ground stop ring has reached ground level, see <br />part B. <br />7. Remove the Turning Bar and replace with the metal sleeve (part F3). <br />8. Replace alternate screw (part F1) and washers (part F2) through <br />sleeve and secure with wing nut, Fig 2. <br />9. Place the small stakes (Part C) in appropriate Adaptor holes and <br />hammer into the ground for additional strength. <br />Ground adaptor installation is complete and ready for your Gama Sonic lamp <br />post installation. <br />1. Remove bolt caps (part E) and washers (part 174) from Adaptor bolts <br />(part A). <br />2. Slide lamp post base over Adaptor bolts. <br />3. Replace washers (part F4) and bolt caps (part E) to secure the base to <br />the Adaptor. <br />4. See instructions for solar lamp post installation to install the remaining <br />parts of your lamp post. <br />4 <br />