Opening of Bids - Spec K - One or More 2018 or Newer 1.0 Cubic Yard Loaders-Backhoes - McCain Industries Inc

Home Browse Search

Steering shall be hydrostatic and incorporate a double-acting cylinder to provide even and effortless steering in both directions, Unit mustconfonn to IS05010 for emergency steering, Loader, Shall include a single lever control, bucket self-levoling with level indicator and return -to -dig. A factory installed, self -storing safety stipport strut is required. The bucketshall roll back not less than 40 degrees at grokind line and have 45 degfee domp angle at full height. 1.3 cu. yd, capacity minimum, Lift capacity to full height - 7,000 lbs minimum. Dump clearance at fall height at a 45 degree dump angle - 89"minimum. Dump Reach at full height, 45 degree dump angle - 27" minimum. Breakout force - 9,600 lb. bucket I cu, yd. SAE heaped capacity minimum. Bucket to be equipped with bolt -on cutting edge. Bucket shall be able to dig 3.5" below grade with bucket bottom flat minimum. Bucket to be equipped with single or dual dump cylinders parallel with the loader an -as. Backhoe: A backhoe with extendable dipper with a 2 foot flat bottom trench depth of 19.5 feet is required, The digging force of the bucket cylinder shall not be less than 13,000 lbs. The backhoe retracted shall have boom lift capacities per SAE J31 and J49 specifications, not less than: 2,300 lbs. minimum at 8 foot below grade 2,400 tbs. minimum at ground level 2,500 lbs, minimum at 8 foot above grade The backhoe shall be furnished with a 24" trenching bucket. The backhoe boom shall have a lever -controlled transport lock/unlock within the m operator's platform, When transporting, the backhoc must be in the over c(, ter position. The reach from swing pivot to bucket tooth shall not be less than 19'6". Two stabilizers with a minimum spread in operating position of 9'5" is required for stability. The backhoe shall have a swing arc of 180 degrees or more.