Laserfiche WebLink
Loader: Shall include a single lever control, bucket self -leveling with level indicator and <br />return -to -dig. <br />A factory installed, self -storing safety support strut is required. The bucket shall <br />roll back not less than 40 degrees at ground line and have 45 degree dump angle at <br />full height. <br />1.3 cu. yd. capacity minimum. <br />Lift capacity to full height - 7,000 lbs minimum. <br />Dump clearance at full height at a 45 degree dump angle - 89" minimum. <br />Dump Reach at full height, 45 degree dump angle - 27" minimum. <br />Breakout force - 9,600 lb. bucket I cu. yd. SAE heaped capacity minimum. <br />Bucket to be equipped with bolt -on cutting edge. <br />Bucket shall be able to dig 3,5" below grade with bucket bottom flat minimum. <br />Bucket to be equipped with single or dual dump cylinders parallel with the loader <br />arms. <br />Backhoe: A backhoe with extendable dipper with a 2 foot flat bottom trench depth of 19.5 <br />feet is required. The digging force of the bucket cylinder shall not be less than <br />13,000 lbs. <br />The backhoe retracted shall have boom lift capacities per SAE J31 and J49 <br />specifications, not less than: <br />2,300 lbs. minimum at 8 foot below grade <br />2,400 lbs. minimum at ground level <br />2,500 lbs. minimum at 8 foot above grade <br />The backhoe shall be furnished with a 24" trenching bucket. <br />The backhoe boom shall have a lever-contro lied transport lock/unlock within the <br />operator's platform. When transporting, the backhoe must be in the over center <br />position. The reach from swing pivot to bucket tooth shall not be less than 19'6". <br />Two stabilizers with a minimum spread in operating position of 9'5" is required for <br />stability. The backhoe shall have a swing are of 180 degrees or more. <br />A hydraulic bucket -attachment coupler shall be supplied allowing bucket - <br />attachment removal and replacement by one person within a five minute period. <br />Coupler shall be compatible with the City's existing compactors and hammers. <br />Backhoe shall have 2-lever controls. <br />