Laserfiche WebLink
4. Fourth Step — Scaling - The entire body shall be coated with an application <br />(4 0 <br />of the patented Dry -In -Place Seal fi-orn Henkel Surface Technologies. This <br />process shall dramatically improve the surface finish's resistance to rusting <br />that occurs from general wear and tear, and shall provide improvements to <br />paint adhesion and other related corrosion that occurs over the life of the <br />products. This shall help retain the "as new" appearance of the factory <br />paint surface. <br />5. Fifth Step - Primer Coat Paint - The seal coat shall be painted using DuPont <br />0 <br />Corlar - a high performance, low VOC/HAPS epoxy polyamide primer - <br />sealer. Corlar is a two -component gray primer -sealer that is lead and <br />chromate free. This shall be applied in an amount necessary to achieve a dry <br />film thickness of 1.2 mil. <br />6. Sixth Step - Finish Top Coat Paint - A high luster finish coat shall be applied <br />ES 0 <br />using DuPont Imron Elite — a high-performance, low VOC (<3,5 lbs/gal RTS)& <br />two -component polyurethane enamel. An arnple amount shall be applied to <br />achieve a dry film thickness of 2 mil and shall result in a finish of 3.2 mil <br />minimum film thickness. <br />7, The body and attaching parts shall be sealed with Tersotat Joint Sealer and <br />0 <br />CavityCoat for rust prevention protection. <br />M. Body Undercoating <br />1. Body Undercoating shall be provided and cover all surfaces under the body. <br />ES 0 <br />t <br />Warranty: One full year complete unit, Engine and drive train extended warranties <br />ES 0 <br />as specified. Hydraulic cylinders and pumps to be warranted for five (5) full years. <br />Body to be warranted for one (1) full year. Successful bidder is responsible for all <br />warranty repairs. Vendor to state nearest warranty dealer. If travel outside the <br />City of South Bend is required for warranty repairs, transportation of the unit is the <br />responsibility of the successful bidder. Transportation must take place within the <br />next normal working day or the responsible party will be charged $ 100 per day late <br />fee. A one year complete body warranty covering parts and labor shall take effect <br />on the body contract date. <br />Curotto-Can <br />Technical <br />Specifications: Dimensions: <br />Overall Size 55"H x 64"W x 81.75"L <br />Inside Height 45.88" <br />Lifting Pocket 6"H x YW x 0.25" thick high -strength steel <br />Weight 1,680 lbs. <br />(Curotto-Can <br />Capacity: <br />Carts <br />Lift Capacity <br />Volume <br />32 to 96 gal. <br />500 lbs. <br />4.6 cu. yd. <br />21 <br />