Laserfiche WebLink
J. The outrigger controls shall be mounted at the rear, under each corner of the bed with <br />roadside valve controlling roadside outriggers and curbside valve controlling curbside <br />outriggers. <br />K, The outrigger controls shall include a truck level bullseye. <br />Body <br />A. The bed shall be 14-foot long aluminum two piece with tic down rails on both sides. <br />B. Top of bed shall be covered with " deck coating. <br />grip <br />C. A standard DOT type bumper shall be installed at the rear of bed with taillights. <br />D. White anti -sail spray suppressant, splashguards shall be provided. <br />E. Step shall be provided on each side at the rear of the body to provide access to the walk - <br />around control platform with non -slip steps and grab handles. <br />Heavy -Duty Hydraulic Boom Winch <br />A. Winch shall be a high efficiency planetary type with integral load -holding brake. <br />B. The winch shall be rated for 5,000 pounds bare drum. <br />C. The winch shall be controlled from an additional valve section of the lower control valve. <br />It shall be pressure compensated to allow feathering the winch and one boom section <br />simultaneously. <br />D. Winch shall be mounted at the base of the boom for a long fleet angle and flat, level <br />spooling of cable. <br />E. The winch shall be supplied with 180 feet of 3/8" diameter 6X37 Improved Plow Steel <br />Iron Wire Rope Core wire rope and a weighted swivel hook, <br />F Unit shall be equipped with anti-2-block switch, weight and hydraulic valve to protect the <br />unit fi-om damage due to lifting the hook into the boom. <br />G. Thice-ton top dead end snatch block shall be provided to operate with 2-part line. <br />H. One (1) 50 pound down haul ball required. <br />I. Required lifting rating 600 pounds at 45-feet radius, 5,900 pounds at 3 foot radius with <br />platform removed. <br />J. Main boom section shall be equipped with a retainer at platform end to stow cable when <br />not in use. <br />Platform JIB Winch <br />A. Winch shall be high -efficiency planetary type with integral load -holding brake. <br />B. The winch shall be rated for 1,000 pounds bare drum. <br />C. Winch capacity shall be minimum 5,00 pounds in all operating positions, <br />D. The winch shall be controlled from an additional valve section on the lower control <br />valve. It shall be pressure compensated to allow feathering the winch and one boom <br />section simultaneously. <br />E. The winch shall be controlled by an additional electric, single actionjoystick located in <br />the upper platform control box. <br />F. The jib winch, winch arm and support shall stow in the platform. <br />16 <br />