10-11-10 Council Agenda & Packet

Home Browse Search

(4) Ignition Park Perimeter Landscaping Requirements All Ignition Park Perimeter Yards shall, at a minimum, be landscaped in compliance with the perimeter yard landscape requirements of Section 21 -07.01 (b) (1) for the Landscaping of Required Perimeter Yards for Industrial Districts. Manmade or natural water features may be incorporated into any front, side or rear yard landscape requirement. (5) Ignition Park Campus Signs NOTE: As Ignition Park is developed, a comprehensive sign package may be developed and be presented to the Area Plan Commission for approval. Approval of such a comprehensive sign package by the Area Plan Commission would supersede the following sign regulations. Ignition Park Campus Signs shall provide identification to the entire Ignition Park and not to identify any individual use or occupant within Ignition Park. a. Type of Signs -- Ignition Park Campus Signs may be either: i. Entry Wall Signs — One (1) entry wall sign may be incorporated into an entry wall treatment located on each side of any shared street road cut into Ignition Park; or, ii. Ground Signs — One (1) ground sign may be located at each shared street road cut into Ignition Park. b. Height and Area: i. Entry wall treatments which include an Ignition Park Campus Sign shall not exceed ten (10) feet in height. The total wall area shall not be limited, however the portion of the wall devoted to ignition Park Campus Sign surface area shall not exceed sixty-four (64) square feet in area. ii. Ignition Park Campus Ground Signs shall not exceed eight (8) feet in height or one - hundred and twenty - eight (128) square feet in area. C. Setback — All portions of an Ignition Park Campus Sign, whether on an entry wall or a freestanding ground sign, shall be setback a minimum often (10) feet from the right-of-way of Sample / Prairie / Cotter / Kendall / Lafayette or a BDDB01 6339098vi Draft Date: October 4, 2010