Laserfiche WebLink
SHALL BE <br />F �e�d un by\/V /�,Joi"Ies AS <br />TYPE DESCRIPTION SPECIFIED <br />(Circle One) <br />of 80,000 to 1,000,000 pounds. <br />The cylinder tubing shall be D.O.M. Tubing, drawn over a <br />mandrel, and shall have tensile strength of 70,000 pounds. The tube <br />shall have a surface harness of 80 Rockwell "B". <br />The cylinder shall dismantle easily and overlap between stages for <br />greater stability. <br />The trunnion collar shall be oscillation <br />Each rod or pin eye shall have a zerk. <br />Ladder: <br />There shall be a fold up stainless ladder located at the driver side <br />(VE" / NO <br />front corner of the body for easy entrance to the dump body. In <br />addition there shall also be a welded stainless step type insert on the <br />front driver's side on the inside of the body, <br />D-Rings: <br />Bed shall have 3 D-Rings on each side of bed to mount leaf box. <br />(001 NO <br />1. <br />The D rings shall be mounted in approved location and place as <br />what the City currently has on their fleet trucks. <br />Tarp Rods: <br />There shall be 2" wide stainless grip strut walk rails located on the <br />0,10111111N11.',') , <br />ESNO <br />sides of the body. Tarp rods shall be installed in approved location <br />and place as what the City currently has on their fleet trucks. <br />Tarp: <br />Tarp system should be of the same system that is presently used by <br />NO <br />the City now and shall be installed in a like manor. System shall be <br />a Pull Tarp system with parts that interchange with City's existing <br />traps. <br />Mounting of Dump Rqdj <br />Shall have a minimum of three (3) brackets (each side) - 2"x 4" flat iron minim -Lim, at least one at rear, <br />one in center, one at ftont. Shall be welded at rear and bolted with three (3) 5/8" bolts per bracket <br />(minimum), Hoist cylinder shall be hooked to central hydraulics with 3/4" high pressure hose (two <br />wire minimum). Floor of body to be approximately 54" off ground +/- 2". All welding to be done at <br />factory on box. Other welding to be certified. Two rear hooks shall be supplied and bolted to rear of <br />fi-ame. LED lights, <br />18 <br />