Professional Services Agreement - DLZ Indiana LLC - New Traffic Signal System at Intersection of Sample and Sheridan

Home Browse Search

(IDM). If it is determined that left turn lanes are warranted, this task will include determination of storage and taper lane lengths. f) Engineer shall evaluate a conceptual design to accommodate the future condition of the intersection. This may include traffic equipment placement and any right of way requirements. g) Preparation of schematic plans of any recommended geometric improvements and the opinion of probable construction cost are not included in this task, h) Engineer shall prepare a Draft report in letter format for the Owner's review. It is assumed three (3) copies shall be provided to the Owner for review purposes. It is assumed that no other agency will be involved in the review and continent process. i) Upon resolution of comments on the draft report, Engineer shall prepare a final letter report and will submit three (3) copies to the Owner. B. Engineer's services under this Study and Report Phase will be considered complete on the date when the revised Report and any other deliverables have been delivered to the Owner. A1.02 DESIGN SERVICES A. Pick -Up Topographic Survey 1. Concurrently with the preparation of the draft Traffic Study Report, and upon written authorization from Owner, Engineer shall: a) Provide necessary additional pick-up field and topographic surveys for design purposes including the following (For survey limits, See Exhibits A.1.): b) Establish horizontal and vertical control throughout the project limits. Horizontal control will be based on Indiana State Plane Coordinates, East Zone, NAD83. Vertical control will be based on NAVD88. c) Request the marking of the underground utilities through the Indiana 811 service d) Provide pick-up supplemental topographic mapping within the limits indicated in Exhibits A.1. The width of the survey corridor will be the apparent right-of-way. The mapping will include features such as curbs, sidewalks, traffic poles, underground utility markings, etc. The height of overhang features such as canopies and traffic signals will be an additional service. The detailing of ADA access points, if required, will be an additional service. e) Locate and provide rim elevations for located castings (manholes, catch basins and curb inlets) within the project limits, including those just beyond the curb line. Exhibit A, Engineer's Services EJCDC E-520 Short Form of Agreement Between Owner and Engineer for Professional Services. Copyright ©2009 National Society of Professional Engineers for EJCDC. All rights reserved. Page 2