Laserfiche WebLink
CRYSTAL <br />L <br />WINDOW 6 DOOR SYSTEMS. LTD. <br />SERIES 2100 CW-PG60-FW FIXED WINDOW <br />manufacturer which has been fabricating/manufacturing commercial grade aluminum windows of <br />similar quality and performance for a minimum of ten (10) years. <br />B. Installer Qualifications: All products listed in this section are to be installed by a single installer <br />with a minimum of five (5) years demonstrated experience in Installing windows of the same type <br />and scope as specified, preferably AAMA certified installers. <br />C. Provide test reports from AAMA accredited laboratory certifying that window units are found to <br />be in compliance with AAMAIWDMA/CSA 101/I.S.2/A440-08 and performance standards listed <br />above. <br />1. Test reports shall be accompanied by the window manufacturer's letter of certification <br />stating that the tested window meets or exceeds criteria for the appropriate <br />AAMA/WDMAICSA 101/I.S.2/A440 test. <br />1.11 DELIVERY, STORAGE, AND HANDLING <br />A. Store products in manufacturer's unopened packaging until ready for installation in accordance <br />with manufacturer's recommendations. <br />B. Protect units against damage from the elements, construction activities and other hazards <br />before, during, and after installation. <br />1.12 PROJECT CONDITIONS <br />A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits <br />recommended by manufacturer for optimum results. Do not Install products under environmental <br />conditions outside manufacturer's absolute limits. <br />1.13 WARRANTY <br />A. Refer to Crystal Window & Door Systems, Ltd, standard warranty. <br />B. Optional Extended Warranty (contact your Crystal sales representative). <br />PART 2 - PRODUCTS <br />2.1 MANUFACTURERS <br />A. Acceptable Manufacturer: Crystal Window & Door Systems, Ltd., which is located at: 31-10 <br />Whitestone Expressway, Flushing, NY 11354; Tel: 718. 961.7300; Tel: 800.472.9988; Fax: <br />718.460.4594; Web: www.crystalwindows.com <br />B. Requests for substitutions will be considered in accordance with provisions of Section 0160 00, <br />2.2 Aluminum: <br />A. Extruded aluminum prime billet 6063-T5 or 6063-T6 alloy for primary components; 6063-T5, <br />6063-T6, or 6061-T6 for structural components; all meeting the requirements of ASTM B221. <br />S. Aluminum sheet alloy 5005 H 32 (for anodic finish), meeting the requirements of ASTM B209 or <br />alloy 3003 H 14 (for painted or unfinished sheet). <br />2.3 Thermal Barrier: <br />A. Structural Thermal Barrier: <br />1. Structural thermal barrier shall consist of poured -in -place polyurethane polymer that shall <br />transfer shear during bending and provide composite action between frame components. <br />SECTION 085113 - 4 <br />