Laserfiche WebLink
CRYSTAL <br />WINDOW & DOOR SYSTEMS. LTD. <br />SERIES 2100 CW-PG60-FW FIXED WINDOW <br />SECTION 08 5113 <br />ALUMINUM WINDOWS <br />PART 1 - GENERAL <br />1.1 SCOPE OF WORK <br />A. Furnish and install aluminum windows as shown in bid drawings and as per specifications <br />stipulated in this section. <br />B. Factory -installed glass & glazing <br />1.2 ITEMS FURNISHED BUT NOT INSTALLED (Enter description and quantityofitems such as extra <br />sash, screens, glass units, hardware, etc. for attic stock) <br />1.3 ITEMS INSTALLED BUT NOT FURNISHED (Enter description and quantity of items such as air <br />conditioners, louvers, duct work to be installed in locations as directed by Architect) <br />1 A RELATED SECTIONS <br />A. Section 07 90 00 - Joint Protection. <br />B. Section 08 4100 - Entrances and Storefronts. <br />C. Section 08 70 00 - Hardware. <br />1.5 REFERENCES <br />A. AAMA - American Architectural Manufacturers Association: <br />1. AAMA/WDMA/CSA 101/I.S.2/A440-08 "North American Fenestration <br />Standard/Specification for Windows, Doors, and Skylights" <br />2. AAMA/WDMA/CSA 101/I.8.2/A440-05 "Standard/Specification for Windows, Doors, and <br />Unit Skylights" <br />3. AAMA 502-08 - Voluntary Specification for Field Testing of Newly Installed Fenestration <br />Products. <br />4. AAMA 611-98 - Voluntary Specification for Anodized Architectural Aluminum <br />5. AAMA 701/702-04 - Voluntary Specification for Pile Weatherstripping and Replaceable <br />Fenestration Weatherseals. <br />6. AAMA 800-07 - Voluntary Specifications and Test Methods for Sealants. <br />7. AAMA 902-07 - Voluntary Specification for Sash Balances. <br />8. AAMA 910-93 - Voluntary Life Cycle' Specifications and Test Methods for Architectural <br />Grade Windows and Sliding Glass Doors, <br />9. AAMA 1503-98 - Voluntary Test Method for Thermal Transmittance and Condensation <br />Resistance of Windows, Doors, and Glazed Wail Sections. <br />10. AAMA 2603-02 - Voluntary Specification, Performance Requirements and Test <br />Procedures for Pigmented Organic Coatings on Aluminum Extrusions and Panels. <br />11. AAMA 2604-05 - Voluntary Specification, Performance Requirements and Test <br />Procedures for High Performance Organic Coatings on Aluminum Extrusions and Panels. <br />12, AAMA 2605-05 - Voluntary Specification, Performance Requirements and Test <br />Procedures for Superior Performing Organic Coatings on Aluminum Extrusions and <br />Panels. <br />B. ASTM — American Society for Testing and Materials: <br />1. ASTM E 283-04 - Standard Test Method for Determining Rate of Air Leakage Through <br />Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across <br />the Specimen. <br />2. ASTM E 330-02 - Standard Test Method for Structural Performance of Exterior Windows, <br />Doors, Skylights, and Curtain Walls by Uniform Static Air Pressure Difference. <br />SECTION 085113 - 1 <br />