Laserfiche WebLink
CMR MUNIF300 <br />Product Code 13077 <br />Safety Data Sheet <br />'Exposure limits are for Inert or nuissance dust. No specific exposure limits have been established for this activated carbon product by OSHA or ACGIH. <br />3.2. Exposure controls <br />Appropriate engineering controls Provide adequate general and local exhaust ventilation. Use process enclosures, local exhaust <br />ventilation, or other engineering controls to control airborne levels below recommended <br />exposure limits. Use explosion -proof equipment with flammable materials. Ensure adequate <br />ventilation, especially in confined areas. Wet activated carbon can deplete oxygen from air in <br />enclosed spaces. If use in an enclosed space is required, procedures for work in an oxygen <br />deficient environment should be followed. <br />Personal protective equipment Gloves. Safely glasses. Insufficient ventilation: wear respiratory protection. <br />Hand protection Gloves should be classified under Standard EN 374 or ASTM F1296. Suggested glove <br />materials are: Neoprene, Nitriie/butadiene rubber, Polyethylene, Ethyl vinyl alcohol laminate, <br />PVC or vinyl. Suitable gloves for this specific application can be recommended by the glove <br />supplier. <br />Eye protection Use eye protection suitable to the environment. Avoid direct contact with eyes. <br />Skin and body protection Wear long sleeves, and chemically impervious PPE/coveralls to minimize bodily exposure. <br />Respiratory protection Use NIOSH-approved dustlparticulate respirator. Where vapor, mist, or dust exceed PELs or <br />other applicable OELs, use NIOSH-approved respiratory protective equipment. <br />SECTION 9: Physical and Chemical Properties <br />9.1. Information on basic physical and <br />chemical properties <br />Physical stale <br />Solid <br />Appearance <br />Granular, powder, or pelletized substance <br />Color <br />Black <br />Odor <br />Odorless <br />Odor threshold <br />No data available <br />pH <br />No data available <br />Relative evaporation rate (butylacetate=1) <br />Not applicable <br />Melting point <br />Not applicable <br />Freezing point <br />Not applicable <br />Boiling point <br />Not applicable <br />Flash point <br />No data available <br />Auto -ignition temperature <br />> 220 °C <br />Decomposition temperature <br />No data available <br />Flammability (solid, gas) <br />> 220 °C <br />Vapor pressure <br />Not applicable <br />Relative vapor density at 20 °C <br />Not applicable <br />Apparent density <br />0.4 - 0.7 g/cc <br />Solubility <br />Insoluble. <br />Log Pow <br />Not applicable <br />Log Kow <br />Not applicable <br />Viscosity, kinematic <br />Not applicable <br />Viscosity, dynamic <br />Not applicable <br />Explosive properties <br />No data available <br />Oxidising properties <br />No data available <br />Explosive limits <br />No data available <br />9.2. Other information <br />No additional information available <br />111: Stability and <br />110.1. Reactivity <br />No dangerous reactions known under normal conditions of use. <br />10.2. Chemical stability <br />Stable under use and storage conditions as recommended in section 7. <br />04/20/2015 - CMR MUNIF300 For Internal Use Only: PR #1 <br />Product Code 13077 <br />