Opening of Bids - One or More 2017 or Newer Single Axle Lightning Loader Spec B - Pyramid Equipment Inc Part 1

Home Browse Search

TO PROPERTY, LOSS OF PROFITS OR ANTICIPATED PROFITS, OR LOSS OF VEHICLE USE. 1.6 Exclusions The following components, parts, or conditions are specifically excluded from coverage under this Warranty. AERODYNAMIC WHEEL COVERS Aerodynamic wheel covers are excluded from coverage under this Warranty AIR SPRINGS Tolerance buildup can occur during the assembly process of the rear suspension and rear cab air springs, and can cause the springs to have the appearance of being crooked, misaligned or improperly installed. This tolerance buildup is not detrimental to the operation of the vehicle and will not have an effect on either the quality of the ride or the durability of the components or vehicle. Straightening of these springs is not covered under this Warranty. ALIGNMENT OF AXLES/WHEELS/STEERING Each DTNA vehicle manufacturing plant uses an integrated alignment system to align axles and wheels and to center the steering wheel to Daimler Trucks North America LLC specifications. Realignment or readjustment of these items, including steering stops and steering poppets, is not covered under warranty. Any special alignment settings at the request of the Owner must be handled between the Dealer and Owner after delivery from factory. These special adjustments are not covered under Warranty. AXLE BREATHER VENTS During the vehicle manufacturing process, an oil run or drip stain may appear at the breather vent. Removing the vent, applying pipe sealant to the threaded vent fitting and re -installing the vent is unnecessary. Removing the axle breather vent and re -sealing the threaded fitting is not covered under this Warranty. CAB INTERIOR COMPONENTS The repair or replacement of cab interior components that are rendered unserviceable due to normal wear or abuse are not covered under this Warranty. These components include, but are not limited to • Curtains • Floor coverings (including floor mats) • Painted trim components • Steering wheel • Steering wheel wrap • Upholstery • Window shades CHROME SURFACES, ALUMINUM AND STAINLESS STEEL COMPONENTS The following items ARE covered under this Warranty: • Chrome peeling off in sheets • Chrome cut at mounting bolts due to over -torque at the factory • Bubbles in the chrome that are not caused by rock chips and/or general rust conditions • Isolated rust along seams or welds The following items are NOT covered under this Warranty: Daimler Trucks North America LLC General rust, for example, rust on the unfinished backside of a bumper Dimpling at the mounting bolts Staining, bluing, and/or yellowing that can be cleaned with a quality cleaning -product Rust, pits, and/or nicks caused by road wash or road debris breaking the chrome surface Streaks/stains/corrosion caused by severe wash solutions or corrosive road salts/chemicals Claims pertaining to failures of chrome surfaces, aluminum, and stainless steel components will not be processed unless a clear digital picture is provided that adequately shows the defect. CLUTCH ADJUSTMENT Clutch adjustments are normally required due to clutch wear and are considered normal maintenance. However, if the clutch adjustment is found to be outside of Company specifications during, or prior to, in-service of the vehicle, a warranty claim will be accepted on a one- time basis. Claims for clutch adjustments will not be accepted unless the adjustment is found to be outside of Company specifications using the special clutch adjustment measuring tools provided by Company (e.g., adjusting the clutch to satisfy feel will not be accepted as warranty). COMPETITION Warranty will become void on any vehicle that is used in competition, including but not limited to: • Racing • Tractor pulls • Other motor sports CONSUMABLE PARTS Parts that are subject to consumption during their normal service life and are routinely replaced during normal maintenance services are covered up to 15,000 miles (24 OOOkm) for all Daimler Trucks North America LLC vehicles except for Thomas Built Bus (TBB) bodies and chassis. TBB consumable parts are covered up to 30 days from date of in-service. These items are: • Antennas • Ashtrays • Belts • Brake Linings • Cigarette lighter assembly • Clutch brake • Clutch linings • Data logger batteries • Desiccant cartridges • Fire extinguishers • Fluorescent ballast and tubes • Fuses • Gladhand • Hosetennas Light bulbs Mattresses Mud flaps Mud flap mounting brackets Caps (radiator, surge, fuel tank) Receiver -dryer filter • Trailer air hoses • Trailer electrical cables The information provided in this document is for general information only and is not offered as customer's warranty. P., 3 & 8 This coverage may be superseded without notification. Effective 8n5/20 tY Copyright Q Daimler Trucks North America LLC. All rights reserved Daimler Trucks North America LLC is a Daimler company.