Laserfiche WebLink
C. Estimated Compensation Amounts: <br />1. Engineer's estimate of the amounts that will become payable for specified <br />services are only estimates for planning purposes, are not binding on the <br />parties, and are not the minimum or maximum amounts payable to <br />Engineer under the Agreement. <br />2. When estimated compensation amounts have been stated herein and it <br />subsequently becomes apparent to Engineer that the total compensation <br />amount thus estimated will be exceeded, Engineer shall give Owner <br />written notice thereof, allowing Owner to consider its options, including <br />suspension or termination of Engineer's services for Owner's convenience. <br />Upon notice, Owner and Engineer promptly shall review the matter of <br />services remaining to be performed and compensation for such services. <br />Owner shall either exercise its right to suspend or terminate Engineer's <br />services for Owner's convenience, agree to such compensation exceeding <br />said estimated amount, or agree to a reduction in the remaining services to <br />be rendered by Engineer, so that total compensation for such services will <br />not exceed said estimated amount when such services are completed. If <br />Owner decides not to suspend the Engineer's services during the <br />negotiations and Engineer exceeds the estimated amount before Owner <br />and Engineer have agreed to an increase in the compensation due Engineer <br />or a reduction in the remaining services, then Engineer shall be paid for all <br />services rendered hereunder. <br />D. To the extent necessary to verify Engineer's charges and upon Owner's timely request, Engineer <br />shall make copies of such records available to Owner at cost. <br />Page 3 <br />Exhibit C -Compensation Packet BC-2: Basic Services (other than RPR) - Standard Hourly Rates Method of Payment <br />EJCDC E-500 Agreement Between Owner and Engineer for Professional Services. <br />Copyright © 2008 National Society of Professional Engineers for EJCDC. All rights reserved. <br />